Custom Frame Bag

$190.00$295.00

Standard features ($190):

    • ECOPAK/X-Pac main panels with black Cordura side panels
    • Lace-up top tube attachment for even load distribution.
    • Bolt-on bottle boss attachments on seat tube and down tube.
    • Velcro attachment to support zipper on seat tube.
    • Tapered width. 3.25″ at the front tapering down to 2.25″ at the back.
    • Burly #8 molded tooth zippers for durability and smooth operation.
    • Hydration hose/electronics port

See below for more information about the optional features. Submit your order, then email andrew@dispersed.bike with your photo. Instructions are here

SKU: N/A Category:

Maximize your carrying capacity with a frame bag custom made for your bike. Interested in a half frame bag? That’s here.

Standard features ($190):

    • ECOPAK/X-Pac main panels with black Cordura side panels
    • Tapered width. 3.25″ at the front tapering down to 2.25″ at the back.
    • Lace up top tube attachment for even load distribution.
    • Bolt on bottle boss attachments
    • Velcro attachment to support zipper
    • Burly #8 molded tooth zippers for durability and smooth operation.
    • Hydration hose port

Optional add-ons:

    • Non-driveside zipper pocket (+$25)
      • Flat pocket with small internal pockets for tools or accessories. Also known as a map pocket.
    • Internal baffles
      • Vertical baffle (+$15)
        •  This vertical divider features velcro to hold the two sides of the bag together. If you need to open up the bag to carry something large, separate the velcro and the baffle folds out of the way. See photo above. Only recommended on larger frames. Particularly useful when using a hydration bladder inside the frame bag, this reserves a spot to slide the bladder in and out when the bag is filled with other items.
      • Horizontal baffle with 2nd driveside zipper (+$30) 
        • This divides the bag into 2 compartments with a separate zipper for each. The baffle is made with velcro so it can be separated to use the full capacity of the bag if necessary.
    • Ultra 200 ultralight material (+$50)
      • Challenge Ultra 200 weighs just 3.5oz/yd², but is incredibly strong and abrasion resistant. Made with UHMWPE fibers and a recycled waterproof film.
      • If you select the Ultra 200 upgrade, all exterior panels will use Ultra 200 instead of X-Pac/Ecopak/Cordura to save weight (unless you select a different accent color).

Perfectly fit to your bike using a high quality photo, instructions below. Email the photo to andrew@dispersed.bike

_______________________________________________

Photo instructions:
    • A dedicated camera will take a much higher quality image if you’ve got access to one.
    • Tape a ruler or tape measure along the top tube so that it is taught and straight. Be sure not to obstruct the inside edges of the main triangle.
    • Remove any other bags that obstruct the view of the main triangle.
    • Remove bottle cages and partially screw in the bottle cage bolts so they’re visible.
    • Take the photo outdoors and standing about 15ft back, level with the center of the bike.
      • If you can get the fork legs, seatstays, and chainstays lined up with each other, then you know you’re back far enough and straight on.
    • When you think you’ve got a good photo, take 2 steps back and take another one. Most photos I get are taken too close to the bike.
    • Email me the full res image – andrew@dispersed.bike
      • Zoom in on your image to check if you can make out the lines on the ruler like you can in the image below.

Example:

___________________________________________________________________
Weight.5 lbs
Non-driveside (map) pocket?

Yes (+$25), No

Internal baffle?

No, Vertical internal baffle (+$15), Horizontal baffle with 2nd driveside zipper (+$30)

Main material

Hot Pink ECOPAK, Red ECOPAK, Burnt Orange X-Pac, Golden Yellow ECOPAK, Olive X-Pac, Green ECOPAK, Teal ECOPAK, Bright Blue ECOPAK, Dark Blue ECOPAK, Purple X-Pac, Coyote ECOPAK, Grey Liteskin, Black ECOPAK, Leopard ($+15, select in dropdown below), Donuts ($+15, select in dropdown below), Black Ultra 200 (+$50, select Ultra option below), Grey Ultra 200 (+$50, select Ultra option below)

Accent material

Hot Pink ECOPAK, Red ECOPAK, Burnt Orange X-Pac, Golden Yellow ECOPAK, Olive X-Pac, Green ECOPAK, Teal ECOPAK, Bright Blue ECOPAK, Dark Blue ECOPAK, Purple X-Pac, Coyote ECOPAK, Grey Liteskin, Black ECOPAK, Leopard ($+15, select in dropdown below), Donuts ($+15, select in dropdown below), Black Ultra 200 (+$50, select Ultra option below), Grey Ultra 200 (+$50, select Ultra option below)

Material upgrades

Leopard or Donut print (+$15), Black/Grey Ultra 200 (+$50), No

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.